Car Stereo Help Removal Guide
|Corvette '86-89 Rear Bose Speaker Enclosure Removal and Installation Instructions|
WE REPAIR FACTORY CORVETTE
RADIOS AND BOSE
Snap, crackle, pop or low/no volume from speaker?
|1) Remove screws securing Bose speaker grill to floor.|
|1) Roll carpet back to allow
access to Bose speakers and mounting.
2) Remove all bolts from all edges of two separate panels securing Bose speakers.
|1) Drivers side Bose speaker enclosure with panel should be removed first. Passenger side Bose speaker enclosure with panel is covered is over lapped by drivers side panel.|
|1) Lift panel with Bose speaker enclosure from back deck, release trigger on connector and disconnect.|
|1) Remove one bolt from one
side of back of panel securing Bose speaker enclosure to panel. Send for
If you have
found these pages to be helpful, please
We purchase BROKEN Bose system
Car Stereo Repair Home | Car Stereo Removal | BOSE repair | FAQ | Shipping | Our Top 10 | About Us
Factory Car Stereo
PHONE (407)327-5033, GOT QUESTIONS?
Normal Business Monday Thru Friday 9am to 5pm EST
Home page www.carstereohelp.com