Ford Contour SVT Car Stereo and Speaker Removal
	Ford Contour SVT Car Stereo Removal
Ford Contour SVT How to Remove Amplifier
	1.1) Drop glove box by releasing side clips. 1.2) Remove screws securing amplifier.
	Ford Wire Harness Factory Wire Harness Codes Below
	Aftermarket Wire Color Codes, Hook Up and Install Factory Connector Codes Below
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
Ford Contour SVT Speaker Removal and Installation Ford Contour SVT  How to Remove and Install Front Speaker Instructions 1.1) Remove two screws along back edge of door panel. 2.1) Remove screws along bottom edge of door panel. 3.1) Remove cover from front edge of door panel and remove exposed screw. 4.1) Remove cover from door open handle cavity and remove exposed screw. 5.1) Remove cover from triangular panel at top of door panel and remove exposed screw. 6.1) Remove screw at front edge of door panel. 7.1) Pry cover off of door pull handle and remove two exposed screws. 8.1) Pull front edge of door open/control panel from door. 8.2) Release clip with screw driver at back edge. 8.3) Pull door panel from door.
Rear Speaker Removal and Installation presently not available.
Ford Car Audio - Wire Diagrams - Wire Color Codes Factory Wire Harness Codes     DO NOT CUT FACTORY WIRE HARNESS     Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above. We discourage cutting the factory wire harness. This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.   Diagram 1     Diagram 2     Diagram 3     Diagrams NOT ACCURATE for 100% of vehicles.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You