Mazda B Series Truck Stereo and Speaker Remove and Install
Mazda B-Series Pick-Up How to Remove and Replace Factory Car Stereo 1.1) Remove four screws securing gear shift trim and remove. 1.2) Remove four screws securing car stereo trim. 2.1) Remove one 10mm bolt securing back of car stereo trim. 2.2) Remove housing with car stereo. 2.3) Disconnect all wires an antenna. 3.1) Remove six screws securing stereo and bracket to housing.
	Color Codes for Aftermarket Installation Factory Wire Harness Codes Below
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
	Erratic Volume Control DIY Repair
Mazda Car Audio - Wire Diagrams - Wire Color Codes   DO NOT CUT FACTORY WIRE HARNESS     Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above. We discourage cutting the factory wire harness. This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.     Diagram 1   Diagram 2   Diagram 3   Wire diagrams may not be 100% accurate for your vehicle.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You