Nissan Sentra Car Radio Replacement and Removal
	Nissan Sentra / 200SX Car Stereo Removal Directions
	1.1) Remove trim from around gear shift by pulling up to release clips.
	2.1) Remove ash tray. 2.2) Remove 4 screws from trim panel around car stereo.
	From under dash, drivers side. 3.1) Remove heater controls looped cable from shaft. 3.2) Release black clip by pulling toward you where indicated. (This releases the cable from its mount and will allow you to pull the dash trim forward enough to have access to car stereo mounting bolts.)
	4.1) Remove trim from dash, be careful of cable. 4.2) Remove four screws securing car stereo to dash. 4.3) Unplug all wiring and antenna.
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
	Erratic Volume Control DIY Repair
Front and Rear Speaker Removal presently not available.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You