 Car Stereo Help Removal Guide Acura Audi BMW Buick Cadillac Allante Chevrolet Corvette Chrysler Daewoo Dodge Ferrari Ford Geo GMC Honda Hyundai Infiniti Isuzu Jaguar Jeep Kia Land Rover Lexus Lincoln Mazda Mercedes Benz Mercury Mitsubishi Nissan Oldsmobile Plymouth Pontiac Porsche Saturn Toyota Volkswagen Volvo |
Cadillac Allante Rear Bose Speaker Enclosure Removal | |
|
Car Stereo Repair Home | Car Stereo Removal | BOSE repair | FAQ | Shipping | Top 10 | About Us WE REPAIR FACTORY CADILLAC
RADIOS AND BOSE
Snap, crackle, pop or low/no volume from speaker? |
||
 |
Cadillac Allante |
|
 |
1) Move front seat forward and
release seat back forward. 2) If this side panel has a key lock, unlock. 3) Pull panel all the way forward, this panel is on a slide track. |
|
 |
1) Remove panel and set to side. | |
 |
1) Bose enclosure with
amplifier connector. 2) Lift trigger on one side of connector up to release. |
|
 |
1) Pull latch from trunk releasing pass through panel. | |
 |
1) Pull panel down, this allows better access for the following steps. | |
 |
1) Remove one screw at bottom
of next panel in slide bracket exposed from removing first panel. *NOTE - there is an additional step for this panel on passenger side, see below. |
|
 |
1) Pull panel forward in slide to remove. | |
 |
1) Remove four screws securing Bose speaker enclosure to mounting brackets. | |
 |
1) Remove Bose speaker enclosure from car. | |
 |
Passenger Side Panel 1) After removing first slide panel, reach behind second
slide panel and push courtesy lamp from panel. |
|
|
If you have
found these pages to be helpful, please CLICK HERE! |
||
