 Car Stereo Help Removal Guide Acura Audi BMW Buick Cadillac Chevrolet Corvette Chrysler Daewoo Dodge Ferrari Ford Geo GMC Honda Hyundai Infiniti Isuzu Jaguar Jeep Kia Land Rover Lexus ES300 Lincoln Mazda Mercedes Benz Mercury Mitsubishi Nissan Oldsmobile Plymouth Pontiac Porsche Saturn Toyota Volkswagen Volvo |
92+ Lexus ES300 Power Antenna Mast Removal and Installation | |
|
Car Stereo
Repair Home | Car stereo removal |
BOSE repair |
FAQ | Shipping | Top 10 |
About Us
WE REPAIR FACTORY LEXUS
RADIOS AND NAKAMICHI '98+/- Power antenna mast is available from your local dealership. |
||
 |
1) With needle nose pliers, insert into slots on top nut of power antenna mount assembly, loosen and remove. Be careful not to slip, you will scratch the paint of your car. | |
 |
1) Turn car stereo on, pull
antenna mast from motor assembly. 2) Measure length of new antenna mast and cable against length of old antenna mast and cable. If they match, skip to last instructions below, if they do not match, continue with instructions. |
|
 |
1) From in side trunk, remove side panel pin from side panel cover. | |
 |
1) Remove side panel for
access to power antenna. 2) Remove power antenna mounting screws/bolts. 3) Remove power antenna motor assembly and disconnect connectors. |
|
 |
1) Disassemble power antenna motor assembly. | |
 |
1) Remove all excess power
antenna mast cable pieces. 2) Re-assemble power antenna motor assembly. 2) Re-install into car. |
|
|
|
1) Insert power antenna mast
cable into opening at top of antenna mast. 2) Turn car stereo off while feeding antenna mast cable into opening. 3) Install top mounting nut. If you have
found these pages to be helpful, please |
|
