Corvette Stereo, Speakers and More
	Corvette Bose Radio Removal
	Corvette Bose Front Speaker Repair for Intermittent Audio
	How to Troubleshoot Corvette Bose Audio
	How to Repair Corvette Bose Audio
Corvette Bose Signal Processor Removal Corvette Bose Signal Processor Removal 1.1) Bose signal processor is located under dash on driver's side of vehicle.  2.1) Pry clip from panel under dash. All clips release with pry pressure. 3.1) Pry second clip from panel under dash. 4.1) Pull front edge of under dash panel down and remove panel. 5.1) Signal processor is now accessible. Note - Your vehicle may have intermittent speakers or low volume to one side. With stereo on, wiggle connector at signal processor, audio may pop in and out. See DIY repair for signal processor after removal. 6.1) Remove one mounting bolt on bracket.. 7.1) Remove second bolt on mounting bracket. 8.1) Pull signal processor down from mounting area for access to connector. 9.1) Release trigger on connector. 10.1) Remove connector. 11.1) Remove signal processor from under dash. 12.1) Remove signal processor. Note - The Bose Corporation has admitted to us they are having problems troubleshooting this system
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You