Do It Yourself Chrysler Sebring LX (Convertible)
Chrysler Sebring LX (Convertible) How to Remove and Install Car Stereo 1.1) Gently pry on car radio trim panel frame releasing clips. 2.1) Remove trim panel from dash. 3.1) Release triggers on AC Control connectors and remove connectors to release panel. 4.1) Remove four screws securing car radio to dash. 5.1) Pull car radio forward, disconnect antenna and connectors. 6.1) Disconnect antenna and release trigger on connector to remove connector from factory car stereo.
	Aftermarket Car Stereo Install
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation
Chrysler Sebring (Convertible) Front Speaker Removal Chrysler Sebring (Convertible)  Front Speaker How to Removal 1.1) Gently pull leading edge of car stereo speaker grill from door panel. 2.1) Pull car stereo speaker grill toward front of car releasing rear tongue groove. 3.1) Remove four screws securing car stereo speaker to door panel. NOTE - for determining aftermarket installation polarity of speaker wires for correct hook up see Speaker Phasing
Chrysler Sebring (Convertible) Rear Speaker Removal Chrysler Sebring (Convertible)  Rear Speaker How to Removal 1.1) Gently pry speaker grill from side panel releasing four clips. Clips release with pressure. 2.1) Remove four screws securing car stereo speaker and remove speaker. NOTE - for determining aftermarket installation polarity of speaker wires for correct hook up see Speaker Phasing
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You