Jeep Grand Cherokee Removing and Installing Car Stereo
	Jeep Grand Cherokee Car Stereo Removal
	Speaker Removal and Replacement Front Dash Rear speaker removal below
	Speaker Removal and Replacement Front Door
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation
Jeep Grand Cherokee Door Speaker Removal and Install How to Remove Speakers Rear Door 1.1) Remove insert from hand hold and set to side. 2.1) Locate exposed screw at bottom of hand hold. 3.1) Remove exposed screw at bottom of hand hold. 4.1) Locate screw at door open handle cavity. 5.1) Remove one screw from door open handle cavity. 6.1) Gently pry top edge of triangular trim panel from door releasing clips. All clips release with pressure. 7.1) Gently pry bottom rear edge of door panel from door releasing clips. 8.1) Work along bottom of door panel releasing clips. 9.1) Work up rear edge of door panel releasing clips. 10.1) Work up front edge of door panel releasing clips. 11.1) Pull bottom of door panel from door, lift door panel up out of window jam and over door lock pin. 12.1) Pull door panel slightly from door. 13.1) Locate door open handle linkage. 14.1) Twist plastic lock to side from linkage. 15.1) Pull hook at end of linkage from base of plastic lock. 16.1) Locate wire harness from door to door panel. 17.1) Pull wire harness from clip on door panel to release. 18.1) Locate connector at end of wire harness to control panel. 19.1) Release trigger on connector to disconnect and remove. 20.1) Squeeze trigger at side of connector into connector to release. 21.1) Remove screws securing speaker to door. 22.1) Remove speaker from door. 23.1) Locate connector on speaker. 24.1) Release trigger on connector to release and remove. 25.1) Removed speaker.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You