ES250 Removing and Installing Stereo and Amplifier
Lexus ES250 How to Remove and Install Car Stereo and Amplifier 1.1) Gently pry trim panel from dash releasing clips. All clips release with pressure. 2.1) Remove four screws securing car stereo to dash. 2.2) Pull car stereo forward, remove antenna and release triggers on connectors to disconnect. 3.1) Remove two 10mm bolts securing amplifier to bottom of center console below stereo. 3.2) Disconnect connectors.
	Factory Car Stereo Removal
	Aftermarket Car Stereo Installation
	Aftermarket Stereo Wire Color Codes
	Factory Wire Harness, Color Codes and Aftermarket Installation
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
	Erratic Volume Control DIY Repair
Front and Rear Speaker Removal and Replacement presently not available.
Lexus Car Audio - Wire Diagrams - Wire Color Codes Nakamichi and Mark Levinson     DO NOT CUT FACTORY WIRE HARNESS     Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above. We discourage cutting the factory wire harness. This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.     Diagram 1   Diagram 2   Diagram 3   Diagram 4 P500 - See Factory Connectors Video above.   Diagram 5 CN701 - See Factory Connectors Video above.     Diagrams may not be 100% accurate for your vehicle.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You