 Car Stereo Help Removal Guide Acura Audi BMW Buick Cadillac Chevrolet Corvette Chrysler Daewoo Dodge Ferrari Ford Geo GMC Honda Hyundai Infiniti Isuzu Jaguar Jeep Kia Land Rover Lexus Lincoln Mazda Mercedes Benz Mercury Mitsubishi Nissan 300ZX Oldsmobile Plymouth Pontiac Porsche Saturn Subaru Toyota Volkswagen Volvo |
Nissan 300ZX 2+2 '89-96 BOSE Rear Speaker/Amp Enclosure Removal |
|
|
Car Stereo Repair Home | Car Stereo Removal | BOSE repair | FAQ | Shipping | Top 10 | About Us WE REPAIR FACTORY (OEM) NISSAN
CAR RADIOS AND BOSE |
||
 |
Nissan 300ZX 2+2 See our Shipping page and Free Repair Estimates. |
|
 |
1) Pull edges of carpet up. 2) Remove wheel well covers. 3) Remove two twists screws. 4) Remove two 10mm nuts. 5) Remove panel. |
|
 |
1) Remove plastic cover from panel. | |
 |
1) Remove a total of five screws and 10mm nuts. 2) Remove panel separating panel guides from other panel. |
|
 |
1) Remove five screws securing side panel. | |
 |
This is where it begins to get tough, this procedure can be done without removing the rear seat. 1) Remove blue connector by releasing trigger. |
|
 |
1) Lift corner of panel, remove two
screws securing bottom of Bose enclosure. 2) Work Bose enclosure out from bottom of enclosure. 3) See our Shipping page and Free Repair Estimates. |
|
 |
1) Remove jack pieces from the Styrofoam casing. 2) Unscrew three plastic tabs and remove Styrofoam casing. 3) Remove six screws securing side panel and repeat enclosure removal process from above step. 4) See our Shipping page and Free Repair Estimates. |
|
If you have found these pages to be helpful, please CLICK HERE! |
||
| Nissan 300ZX Power Antenna Mast Replacement | ||
