|
|
Jeep Wrangler Front Speaker Removal and Installation | |
| Car Stereo
Repair Home | Car Stereo Removal |
BOSE Repair |
FAQ | Shipping | Top 10 |
About Us We would like to thank Paul D. for sending these instructions for posting, Thank you! |
||
 |
Jeep Wrangler |
|
 |
1) Top down, doors off. 2)Remove two per side T-40 screws for roll bar at windshield. These screws have Loc-tite and should have Loc-tite reapplied during assembly. |
|
 |
1) Remove two per side T-20 screws securing sun visor to windshield. | |
 |
1) Remove two T-40 and two
T-45 screws per side from windshield support plates. 2) Lower windshield. |
|
 |
1) Remove the dash section that encircles the steering column. | |
 |
1) Remove three per side T-25
screws on outside edge of dash. 2) Remove five T-25 screws from top of dash and two Phillips screws (exposed from lowering windshield). |
|
 |
1) Now the dash can be shimmied back out of the way. | |
 |
1) This will allow for access to speakers. | |
 |
1) Remove nuts securing driver's side speaker to dash, release connector and remove speaker. | |
 |
1) Remove nuts securing passenger's side speaker to dash, release connector and remove speaker. | |
 |
Old and new speaker |
|
